|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
Cable pod
1 2 Turn the two pod thumbscrews counterclockwise until they turn freely. Grasp the pod, and gently pull it away from the printer.
Figure 6. Hint
Remove the cable pod For easier installation, start tightening the top thumbscrew (do not fully tighten) and then tighten the bottom thumbscrew when replacing the cable pod. Make sure to fully tighten both thumbscrews.
Q1342-90910
External assemblies 17
|
